 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| www.pca.com inductors electronics inc.
pca part no. inductance (h) dcr ( ? max.) idc (a) inductance l w h epi-b20 toroid series 1.05 - 248 .011 - 2.225 .180 - 3.4 0.9 - 220 .330 .330 .270 epi-b30 toroid series 1.8 - 360 .007 - 2.0 .260 - 3.1 1.7 - 330 .435 .440 .360 epi-bh30 toroid series 5 - 167 .0148 - .333 .94 - 4.8 3.8 - 116 .425 .430 .360 epi-bsp30 toroid series 123 .5 .610 - .850 94 .500 .500 .215 epi-b37f toroid series 10.4 - 56 .024 - .208 1.7 - 4.0 9.2 - 48.7 .500 .215 .500 epi-b38 toroid series 1.3 - 518 .004 - 1.3 .42 - 9.4 1.1 - .380 .555 .560 .350 epi-bh38 toroid series .9 - 1.76 .0016 - .0028 12 - 14 .72 - 1.31 .600 .615 .370 epi-b44 toroid series .92 - 1372 .0036 - 1.45 .48 - 10 .82 - 1000 .585 .610 .390 epi-bh44 toroid series 2.1 - 3.1 .0027 - .0040 11 - 14 1.4 - 2.2 .650 .650 .400 epi-bhc44 toroid series .92 .0011 23.8 .58 .865 .715 .390 epi-b50 toroid series 1.18 - 1314 .0037 - 1.25 .5 - 11 1.0 - 1000 .670 .700 .390 epi-bh68 toroid series 27 - 265 .025 - .394 1.5 - 5.0 22 - 220 .940 .940 .390 epi-bhc68 toroid series 3.51 .0028 22.4 2.13 1.11 1.00 .390 epi-bsph68 toroid series 1.94 - 7.1 .001 - .004 24 - 38 1.1 - 3.2 1.220 1.00 .500 epi-d8763 drum series .78 - 15 .0026 - .032 4.4 - 15 8 - 30 .880 .640 .315 epi-f1818 shielded series 1.2 - 180 .024 - 1.54 .22 - 2.56 1.2 - 180 .195 .195 .118 epi-f1818l shielded series 1.0 - 39 .045 - .709 .30 - 1.72 1 - 39 .195 .195 .079 epi-f2222 shielded series 2.6 - 100 .018 - .520 .42 - 2.6 2.6 - 100 .224 .224 .118 epi-f2626 shielded series 3.3 - 100 .02 - .358 .65 - 3.5 3.3 - 100 .264 .264 .157 epi-f2626l shielded series 3.0 - 100 .024 - .535 .54 - 3.00 3 - 100 .264 .264 .118 epi-f3030 shielded series 10 - 1000 .049 - 6.00 .18 - 1.84 10 - 1000 .287 .287 .177 epi-f3030l shielded series 10 - 1000 .072 - 9.44 .16 - 1.68 10 - 1000 .287 .287 .138 epi-f4040 shielded series 1.5 - 330 .0081 - 1.09 .7 - 10 1.5 - 330 .402 .394 .150 epi-f4747 shielded series 10 - 1000 .022 - 1.82 .55 - 5.40 10 - 1000 .472 .472 .315 epi-f4747l shielded series 10 - 1000 .025 - 1.53 .40 - 4 10 - 1000 .472 .472 .236 epi-f4747lp shielded series 3.9 - 330 .015 - .990 .5 - 6.5 3.9 - 330 .472 .472 .177 epi-g1816 drum series 1.0 - 68 .049 - 1.117 .37 - 2.56 1 - 68 .177 .157 .126 epi-g4036 drum series 10 - 8200 .06 - 26 .05 - 2.6 10 - 8200 .394 .354 .213 epi-g4036l drum series 10 - 560 .053 - 1.904 .32 - 2.38 10 - 560 .394 .354 .157 epi ksp45 series .55 - 78.4 .006 - .339 .75 ? 5.90 .4 ? 53 .460 .460 .235 epi ksp45l series .40 ? 38.4 .006 - .636 .70 ? 2.75 .3 ? 56.0 .460 .460 .165 epi ksp56 series .44 ? 78.4 .004 - .220 1.05 ? 7.0 .30 - 40 .560 .560 .250 contents surface mount power inductor series e l e c t r o n i c s i n c . surface mount power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? optimized for nationals lm259x series ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? also suitable for use in high quality filter applications ? 150 khz & 500 khz switching frequency ? low cost inductor epi b20 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxb20 rev. 3 3/5/03 1.05 5.2 7.5 10.9 16.8 25 36.5 51.6 75 110 166 248 induct. (h 20%) @ 0 adc dcr ( ? typ.) .011 .051 .061 .094 .148 .224 .343 .408 .625 .958 1.476 2.225 vt1 (v-sec) 150 khz --- --- --- --- --- 6.6 8.0 9.3 11.3 14 17 20.6 @ vt1 c (typ.) --- --- --- --- --- 42 38 34 37 37 37 40 induct. (h 15%) @ idc 0.9 4.7 6.8 10 15 22 33 47 68 100 150 220 part number epi1l0342b20 epi4l7122b20 epi6l8951b20 epi100801b20 epi150701b20 epi220601b20 epi330441b20 epi470371b20 epi680321b20 epi101261b20 epi151211b20 epi221181b20 core loss idc (ma) 3400 1200 950 800 700 600 440 370 320 260 210 180 vt2 (v-sec) 260 khz 0.5 2.0 2.4 3.0 3.6 --- --- --- --- --- --- --- national semiconductor chip --- --- --- --- --- lm259x-l7 lm259x-l6 lm259x-l5 lm259x-l4 lm259x-l3 lm259x-l2 lm259x-l1 @ vt2 c (typ.) 54 40 34 35 40 --- --- --- --- --- --- --- temp.rise --- --- --- --- --- 23.4 23.4 23.4 23.4 23.4 23.4 23.4 @ vt1 (mw) @ vt2 (mw) 6.5 23.4 23.4 23.4 23.4 --- --- --- --- --- --- --- package b20 .330 (8.83) .260 (6.60) .330 (8.38) .270 (6.86) .300 (7.62) .060 (1.52) suggested pad latout .270 max. (6.86) note: coplanarity within .005 max. pca epixxxxxxb20 d.c. e l e c t r o n i c s i n c . surface mount power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? optimized for nationals lm259x series ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? also suitable for use in high quality filter applications ? 150 khz & 500 khz switching frequency ? low cost inductor epi b30 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxb30 rev. 3 3/5/03 1.8 2.66 4.95 10.6 16 24 35 51 74 108 163 242 360 induct. (h 20%) @ 0 adc dcr ( ? typ.) .007 .008 .018 .042 .067 .101 .153 .235 .358 .535 .836 1.3 2.0 vt1 (v-sec) 150 khz 2.7 3.3 4.7 6.7 8.0 10.0 12.0 14.7 17.3 21.3 26.0 31.3 38.0 @ vt1 c (typ.) 22 21 21 26 29 27 28 29 30 30 31 32 32 induct. (h 15%) @ idc 1.7 2.5 4.7 10 15 22 33 47 68 100 150 220 330 part number epi1l7312b30 epi2l5272b30 epi4l7192b30 epi100152b30 epi150132b30 epi220102b30 epi330831b30 epi470701b30 epi680581b30 epi101481b30 epi151391b30 epi221321b30 epi331261b30 core loss idc (ma) 3100 2700 1900 1500 1300 1000 830 700 580 480 390 320 260 vt2 (v-sec) 260 khz 1.6 2.0 2.8 4.0 --- --- --- --- --- --- --- --- --- national semiconductor chip --- --- --- --- lm259x-l16 lm259x-l15 lm259x-l14 lm259x-l13 lm259x-l12 lm259x-l11 lm259x-l10 lm259x-l9 lm259x-l8 @ vt2 c (typ.) 22 21 21 26 --- --- --- --- --- --- --- --- --- temp.rise 44 44 44 44 44 44 44 44 44 44 44 44 44 @ vt1 (mw) @ vt2 (mw) 44 44 44 44 --- --- --- --- --- --- --- --- --- package b30 .415 (10.80) .350 (8.89) .430 (10.92) .360 (9.14) .400 (10.16) .060 (1.52) suggested pad latout .360 max. (9.14) note: coplanarity within .005 max. pca epixxxxxxb30 d.c. e l e c t r o n i c s i n c . surface mount power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? also suitable for use in high quality filter applications ? 500 khz switching frequency epi bh30 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. package bh30 electrical parameters @ 25 c unless otherwise specified dimensions are in inches /mm .010 /.25 5.0 12.6 35.2 167 inductance (h 15%) @ 0 adc dcr ( ? typ.) .0148 .0377 .123 .333 idc (amps) 4.8 2.8 1.40 .94 part number epi3l8482bh30 epi9l6282bh30 epi290142bh30 epi111941bh30 inductance (h 15%) @ idc 3.8 9.6 29 116 vt (v-sec) @ 500 khz 1.6 2.6 4.3 9.4 temp. rise @ idc (c typ.) 57 51 43 51 .425 (10.80) .360 (9.14) .430 (10.92) .360 (9.14) .400 (10.16) .060 (1.52) suggested pad latout pca epixxxxxxbh30 d.c. .360 max. (9.14) note: coplanarity within .005 max. csixxxxxxbh30 rev. 1 12/17/02 ? core loss @ vt : 15 mw ? e l e c t r o n i c s i n c . surface mount power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? used as a sepic inductor on t.i.s tps6113x series ? low loss material ensures operation in high frequency switching converters, such as buck, boostcouple inductor or as flyback transformer ? also suitable for use in high quality filter applications ? ul1446 class b insulating system ? ul94v-0 recognized materials ? 250 khz switching frequency epi bsp30 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxbsp30 rev. 4 5/5/04 363.4 90.8 269.7 67.4 190.0 47.5 130.8 32.7 88.1 22.0 62.8 15.7 41.6 10.4 22.0 5.51 10.4 2.61 8.6 2.15 363.4 90.8 inductance (h 15%) @ 0 adc dcr ( ? typ.) 1.048 .262 .708 .177 .476 .119 .320 .080 .212 .053 .152 .038 .096 .024 .068 .017 .036 .009 .026 .0065 1.048 .262 i dc (amps) 0.65 1.30 0.75 1.50 0.90 1.80 1.08 2.16 1.32 2.64 1.56 3.12 1.92 3.84 2.60 5.20 3.60 7.20 4.15 8.30 .610 .850 part number epi900132bsp30 epi670152bsp30 epi470182bsp30 epi330212bsp30 epi220262bsp30 epi150312bsp30 epi100382bsp30 epi5l5522bsp30 epi2l6722bsp30 epi2l1832bsp30 epi331611bsp30 series parallel series parallel series parallel series parallel series parallel series parallel series parallel series parallel series parallel series parallel series parallel connection 344.9 86.2 256.0 64.0 180.0 45.0 124.2 31.0 83.6 20.9 59.5 14.9 39.5 9.9 20.9 5.2 10.0 2.5 8.17 2.05 350 90 inductance (h 15%) @ idc et (v-sec.) @ 250 khz 100.40 50.20 86.48 43.24 72.56 36.28 60.24 30.12 49.44 24.72 41.68 20.84 33.92 16.96 24.72 12.36 16.96 8.48 15.44 7.72 100.40 50.20 package bsp30 pca epixxxxxxbsp30 d.c. .215 max. (5.46) .330 (8.38) .410 (10.41) .060 (1.52) .175 (4.45) 1 4 2 3 .410 (10.41) .500 max. (12.70) .500 max. (12.70) 1 4 2 3 .330 (8.38) pin 1 i.d. input tps6113x swn pgnd fb vbat lbi skipen gnd swp control outputs vcc1 vout en ldoen pgood lbo ldoout ldoin ldosense vcc2 on on on off off off control inputs l1 l2 application schematic 2 14 3 l1 l2 e l e c t r o n i c s i n c . surface mount power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? also suitable for use in high quality filter applications ? up to 1 mhz switching frequency ? ul 94v-0 recognized materials epi b37f series product performance is limited to specified parameters. data is subject to chan g e without prior notice. package electrical parameters @ 25 c unless otherwise specified dimensions are in inches /mm .010 /.25 10.4 14.6 24.9 56.0 82.6 99.4 151.7 219.3 330.6 470.9 inductance (h 15%) @ 0 adc dcr ( ? typ.) .020 .028 .048 .115 .172 .235 .371 .446 .691 1.021 idc (amps) 4.0 3.2 2.5 1.7 1.4 1.3 1.0 .81 .65 .53 part number epi100402b37f epi150322b37f epi250252b37f epi560172b37f epi820142b37f epi101132b37f epi151102b37f epi221811b37f epi331651b37f epi471531b37f inductance (h 15%) @ idc 9.2 13.4 23 50 75 90 135 198 308 448 vt (v-sec) @ 265 khz 18.9 22.3 29.1 43.8 53.3 58.2 71.7 86.8 105.7 126.5 temp. rise @ idc (c typ.) 50 47 48 52 53 60 57 47 47 46 .500 max. (12.70) .395 (10.03) .500 max. (12.70 .395 (10.03 .500 (12.70) .060 (1.52) suggested pad latout pca epixxxxxb37f d.c. .215 max. (5.46) note: coplanarity within .005 max. csixxxxxxb37f rev. 3 12/17/02 ? core loss @ vt : 25 mw ? e l e c t r o n i c s i n c . surface mount power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? 150 khz switching frequency for nationals lm259x series ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? also suitable for use in high quality filter applications ? 200 khz & 500 kh khz switching frequency ? low cost inductor epi b38 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxb38 rev. 6 3/5/03 package b38 .545 (13.94) .510 (12.95) .550 (103.97) .510 (12.95) .520 (13.21) .060 (1.52) suggested pad latout .350 max. (8.89) note: coplanarity within .005 max. pca epixxxxxxb38 d.c. temp. rise vt3 (v-sec) @ 150 khz --- --- --- --- --- --- --- 12.7 --- 14.7 --- 18 --- 22 --- 26 --- --- --- --- 32 38.7 --- 46.7 56.7 --- 1.3 2.3 3.6 6.0 8.1 11.6 14.4 17.4 20.7 24.0 30.0 37.0 41.6 52.0 60.5 76 3.6 6.1 20.7 69.7 113 166 260 242 360 518 inductance (h 15%) @ 0 adc dcr ( ? typ.) .004 .005 .006 .013 .020 .030 .042 .046 .062 .087 .097 .130 .174 .248 .268 .300 .0063 .0132 .050 .180 .365 .560 .434 .836 1.30 .783 vt2 (v-sec) @ 500 khz 1.0 1.3 1.6 2.0 2.3 2.8 3.1 3.4 3.7 4.0 4.5 5.0 5.3 5.9 6.4 7.8 2.0 2.8 5.2 9.4 12 14.8 18.2 17.6 21.6 26 idc (amps) 9.4 8.0 6.6 5.0 4.4 3.4 2.8 2.6 2.3 1.8 1.6 1.4 1.2 1.1 1.0 1.0 8.0 5.4 2.7 1.3 .82 .66 .90 .55 .42 .72 part number epi1l1942b38 epi1l9802b38 epi3l0662b38 epi5l0502b38 epi6l6442b38 epi100342b38 epi120282b38 epi150262b38 epi180232b38 epi220182b38 epi270162b38 epi330142b38 epi390122b38 epi470112b38 epi560102b38 epi680102b38 epi2l8802b38 epi4l9542b38 epi170272b38 epi600132b38 epi101821b38 epi151661b38 epi201901b38 epi221551b38 epi331421b38 epi381721b38 inductance (h 15%) @ idc 1.1 1.9 3.0 5.0 6.6 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 2.8 4.9 17 60 100 150 200 220 330 380 vt1 (v-sec) @ 200 khz 2.3 3.1 3.9 5.0 5.8 7.0 7.8 8.5 9.3 10.0 11.3 12.4 13.3 14.8 16.0 19.5 3.8 5.0 9.0 17 21.5 26 33 31.5 38.5 46.5 national semicon. chip --- --- --- --- --- --- --- lm259x-l25 --- lm259x-l24 --- lm259x-l23 --- lm259x-l22 --- lm259x-l21 --- --- --- --- lm259x-l20 lm259x-l19 --- lm259x-l18 lm259x-l17 --- 40 39 35 40 37 40 40 38 39 35 32 33 32 37 34 37 46 46 43 37 32 32 42 32 30 46 @ vt1 c (typ.) @ vt2 c (typ.) 40 39 35 40 37 40 40 38 39 35 32 33 32 37 34 37 46 46 43 37 32 32 42 32 30 46 @ vt3 c (typ.) --- --- --- --- --- --- --- 41 --- 38 --- 36 --- 40 --- 40 --- --- --- --- 35 35 --- 35 33 --- notes : 1. core loss at ref. vt 1 & vt 2 = 37 mw 2. core loss at ref. vt 3 = 67 mw 3. inductance change at idc: 20% max. 4. coplanarity within .005 max. e l e c t r o n i c s i n c . surface mount power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? also suitable for use in high quality filter applications ? 250 khz & 500 khz switching frequency epi bh38 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxbh38 rev. 2 3/5/03 0.9 1.3 1.76 induct. (h 15%) @ 0 adc dcr ( ? typ.) .0016 .0024 .0028 vt1 (v-sec) 250 khz 1.8 1.6 2.6 @ vt1 c (typ.) 39 47 47 induct. (h 20%) @ idc 0.72 0.99 1.31 part number epi0l7143bh38 epi0l9133bh38 epi1l3123bh38 core loss idc (a) 14 13.3 12 vt2 (v-sec) 500 khz 1.2 1.04 1.7 @ vt2 c (typ.) 39 47 47 temp.rise 47 22.4 47 @ vt1 (mw) @ vt2 (mw) 47 22.4 47 package bh38 schematic .600 max. (15.24) .615 max. (15.62) .500 (12.70) .440 (11.18) .080 (2.03) pca csixxxxxxbh38 d.c. .370 max. (9.40) pad layout .500 (12.70) pin 1 i.d. *coil must clear seating plane by .010/0.25 coplanarity : .005/.013 *seating plane e l e c t r o n i c s i n c . surface mount power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? 150 khz switching frequency for nationals lm259x series ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? also suitable for use in high quality filter applications ? 500 khz switching frequency epi b44 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxb44 rev. 2 3/5/03 induct. (h 15%) @ idc .82 20% 1.5 20% 2.2 20% 3.3 4.5 6.5 10 15 22 33 47 56 68 100 150 220 330 470 680 1000 part number temp.rise 0.92 1.60 2.55 4.31 5.74 8.26 13.5 20.0 29.5 45.0 63.75 77.0 95.0 140 202 303 451 645 930 1372 induct. (h 15%) @ 0 adc dcr ( ? typ.) .0036 .0048 .0061 .0079 .009 .014 .022 .027 .043 .065 .077 .121 .122 .182 .284 .427 .650 .778 1.20 1.45 vt1 (v-sec) @ 500 khz 1.2 1.6 2.0 2.6 3.0 3.6 4.6 5.6 6.8 8.4 10.0 11.0 12.2 14.8 17.8 21.8 26.6 31.8 38.2 46.4 @ vt1 c (typ.) 38 40 40 40 35 37 45 36 41 41 39 44 40 41 41 42 42 39 41 36 epi0l8103b44 epi1l5902b44 epi2l2802b44 epi3l3702b44 epi4l5602b44 epi6l5502b44 epi100452b44 epi150352b44 epi220312b44 epi330252b44 epi470222b44 epi560202b44 epi680182b44 epi101152b44 epi151122b44 epi221102b44 epi331801b44 epi471701b44 epi681581b44 epi102481b44 idc (amps) 10.0 9.0 8.0 7.0 6.0 5.0 4.5 3.5 3.1 2.5 2.2 2.0 1.8 1.5 1.2 1.0 0.8 0.7 0.58 0.48 vt2 (v-sec) @ 150 khz --- --- --- --- --- --- --- 13.3 16.7 20.0 24.7 --- 30 36.7 43.3 53.3 65.3 --- --- --- national semiconductor chip -- --- --- --- --- --- --- lm259x-l34 lm259x-l33 lm259x-l32 lm259x-l31 --- lm259x-l30 lm259x-l29 lm259x-l28 lm259x-l27 lm259x-l26 --- --- --- @ vt2 c (typ.) --- --- --- --- --- --- --- 38 43 43 41 --- 42 43 43 45 44 --- --- --- package b44 .575 (14.61) .510 (12.95) .600 (15.24) .510 (12.95) .550 (13.97) .060 (1.52) suggested pad latout .390 max. (9.90) note: coplanarity within .005 max. pca epixxxxxxb44 d.c. ? core loss at ref. vt1 : 45 mw ? core loss at ref. vt2 : 72 mw ? page # e l e c t r o n i c s i n c . e l e c t r o n i c s i n c . surface mount power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? also suitable for use in high quality filter applications ? 250 khz & 500 khz switching frequency epi bh44 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxbh44 rev. 3 3/5/03 2.1 3.1 induct. (h 15%) @ 0 adc dcr ( ? typ.) .0027 .0040 vt1 (v-sec) 250 khz 2.48 3.32 @ vt1 c (typ.) 50 49 induct. (h 15%) @ idc 1.4 2.2 part number epi1l4143bh44 epi2l2113bh44 core loss idc (a) 14 11 vt2 (v-sec) 500 khz 1.6 2.2 @ vt2 c (typ.) 50 49 temp.rise 36 46 @ vt1 (mw) @ vt2 (mw) 36 46 package bh44 schematic .650 max. (16.51) .650 max. (16.51) .570 (14.48) .490 (12.45) .080 (2.03) pca csixxxxxxbh44 d.c. .400 max. (10.16) pad layout .570 (14.48) pin 1 i.d. *coil must clear seating plane by .010/0.25 coplanarity : .005/.013 *seating plane e l e c t r o n i c s i n c . surface mount power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? also suitable for use in high quality filter applications ? 500 khz switching frequency epi bhc44 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. package bhc44 primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 2.33 0.58 inductance (h 15%) @ 0 idc dcr ( ? typ.) .0046 .0011 idc (amps) 11.9 23.8 part number epi0l6243bhc44 inductance (h 15%) @ odc 3.67 0.92 vt (v-sec) @ 500 khz 2.0 1.0 temp. rise (c typ.) @ vt1 58 58 csixxxxxxbhc44 rev. 1 3/5/03 ? core loss @ ref. vt : 32 mw ? .865 max. (21.97) .715 max. (18.16) .390 max. (9.91) .770 (19.56) .360 (9.14) .300 (7.62) .080 (2.03) .745/.775 (18.92/19.69) 4 3 1 2 4 3 1 2 pca epixxxxxxbhc44 d.c. suggested pad layout schematic 4 2 3 1 series parallel connection e l e c t r o n i c s i n c . surface mount power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? also suitable for use in high quality filter applications ? 500 khz & 200 khz switching frequency epi b50 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxb50 rev. 3 3/5/03 induct. (h 15%) @ idc 1.0 20% 1.5 20% 2.2 20% 3.3 4.7 6.8 10 15 22 33 47 56 60 68 100 150 220 330 470 680 1000 temp.rise 1.18 1.9 2.9 4.0 6.1 9.6 16.2 21.3 29.4 44.3 62.4 73 64.9 81 118 177 270 418 607 894 1314 induct. (h 15%) @ 0 adc dcr ( ? typ.) .0037 .0047 .0058 .0069 .0085 .0106 .016 .026 .037 .061 .086 .121 .100 .202 .300 .460 .566 .705 .850 1.03 1.25 vt1 (v-sec) @ 500 khz 1.4 1.8 2.2 2.6 3.2 4.0 5.0 6.0 7.0 8.6 10.2 11.0 --- 11.6 13.6 17.2 21.2 26.4 31.8 38.6 46. @ vt1 c (typ.) 35 39 39 37 40 40 37 40 36 38 38 37 --- 36 34 36 36 36 34 31 27 part number epi1l0113b50 epi1l5103b50 epi2l2942b50 epi3l3832b50 epi4l7792b50 epi6l8702b50 epi100552b50 epi150452b50 epi220352b50 epi330292b50 epi470242b50 epi560202b50 epi600102b50 epi680152b50 epi101122b50 epi151102b50 epi221901b50 epi331801b50 epi471701b50 epi681601b50 epi102501b50 idc (amps) 11.0 10.4 9.4 8.3 7.9 7.0 5.5 4.5 3.5 2.9 2.4 2.0 1.0 1.5 1.2 1.0 0.9 0.8 0.7 0.6 0.5 vt2 (v-sec) @ 200 khz --- --- --- --- --- --- --- --- --- --- --- --- 19.8 --- --- --- --- --- --- --- --- @ vt2 c (typ.) --- --- --- --- --- --- --- --- --- --- --- --- 14 --- --- --- --- --- --- --- --- package b50 .660 (16.76) .580 (14.73) .690 (17.53) .590 (14.99) .620 (15.75) .060 (1.52) suggested pad latout .380 max. (9.65) note: coplanarity within .005 max. pca epixxxxxxb50 d.c. ? core loss at ref. vt1 : 48 mw ? core loss at ref. vt2 : 53.7 mw ? e l e c t r o n i c s i n c . surface mount power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? also suitable for use in high quality filter applications ? 500 khz switching frequency epi bhc68 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. package bhc68 primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 8.55 2.13 inductance (h 15%) @ 0 idc dcr ( ? typ.) .0114 .0028 idc (amps) 11.2 22.4 part number epi2l1223bhc68 inductance (h 15%) @ odc 14.00 3.51 vt (v-sec) @ 500 khz 6.4 3.2 temp. rise (c typ.) @ vt1 59 59 csixxxxxxbhc88 rev. 2 9/17/03 ? core loss @ ref. vt : 83 mw ? 1.00 max. (25.40) .390 max. (9.91) 1.010 (25.65) .620 (15.75) .300 (7.62) .080 (2.03) .985/1.015 (25.02/25.78) 4 3 1 2 4 3 1 2 pca epixxxxxxbhc68 suggested pad layout schematic 4 2 3 1 series parallel connection 1.110 max. (28.19) e l e c t r o n i c s i n c . surface mount power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? also suitable for use in high quality filter applications ? 500 khz switching frequency epi bhc68 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. package bhc68 primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 8.55 2.13 inductance (h 15%) @ 0 idc dcr ( ? typ.) .0114 .0028 idc (amps) 11.2 22.4 part number epi0l6243bhc68 inductance (h 15%) @ odc 14.00 3.51 vt (v-sec) @ 500 khz 6.4 3.2 temp. rise (c typ.) @ vt1 59 59 csixxxxxxbhc88 rev. 1 3/5/03 ? core loss @ ref. vt : 83 mw ? 1.00 max. (25.40) .390 max. (9.91) 1.010 (25.65) .620 (15.75) .300 (7.62) .080 (2.03) .985/1.015 (25.02/25.78) 4 3 1 2 4 3 1 2 pca epixxxxxxbhc68 suggested pad layout schematic 4 2 3 1 series parallel connection 1.110 max. (28.19) e l e c t r o n i c s i n c . surface mount power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? also suitable for use in high quality filter applications ? 250 khz & 500 khz switching frequency schematic epi bsph68 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. package electrical parameters @ 25 c unless otherwise specified dimensions are in inches /mm .010 /.25 temp. rise (c typ.) connection series parallel series parallel series parallel part number epi1l1383bsph68 epi2l3273bsph68 epi3l2243bsph68 dcr ( ? typ.) .004 .001 .0090 .0023 .012 .003 vt 1 (v-sec.) @ 250 khz 8.8 4.4 12.4 6.2 15.2 7.6 idc (a) 19 38 13.5 27 12 24 inductance (h 15%) @ idc 4.47 1.1 9.12 2.3 12.9 3.2 56 56 63 63 54 54 @ vt1 @ vt2 56 56 63 63 54 54 inductance (h 15%) @ odc 7.74 1.94 15.8 3.95 28.4 7.1 vt 2 (v-sec.) @ 500 khz 5.8 2.9 8.2 4.1 9.4 4.7 note : 1) core loss at ref. vt1 & vt2 = 124 mw. 2 14 3 1.220 max. (30.99) 1.00 max. (25.40) .500 max. (12.70) 1.097 (27.86) .600 (15.24) .400 (10.16) .155 (3.94) 1.100 (27.94) 3 4 2 1 3 4 2 1 suggested pad layout pca epixxxxxxbsph68 d.c. .320 (8.13) csixxxxxxbsph68 rev. - 7/18/02 e l e c t r o n i c s i n c . power choke tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? used in power ac line filters, ac-ac converters and switching power supplies ? ul 94v-0 recognized components ? ul 1446 class b insulation system ? meets or exceeds csa/iec/vde/ul specifications for creepage, clearance and dielectric strength ? 50 hz - 500 hz switching frequency ? 3750 vrms isolation ? in ee25 standard package epz3033-x product performance is limited to specified parameters. data is subject to chan g e without prior notice. electrical parameters @ 25 c unless otherwise specified dimensions are in inches /mm .010 /.25 temperature rise (c max.) @ max. current 18 22 16 18 21 25 18 20 22 18 21 16 19 23 25 22 16 18 21 17 20 schematic 2 49 7 l1 l2 package .830 (21.10) .400 (10.20) .175 (4.40) 1.070 (27.20) .860 (21.80) 1.060 (26.90) .025 sq. (.635) 92 74 .620 (15.75) part number epz3033-332 epz3033-392 epz3033-472 epz3033-562 epz3033-682 epz3033-822 epz3033-103 epz3033-123 epz3033-153 epz3033-183 epz3033-223 epz3033-273 epz3033-333 epz3033-393 epz3033-473 epz3033-563 epz3033-683 epz3033-104 epz3033-124 epz3033-222 epz3033-154 dcr ( ? max.) .32 .40 .45 .50 .60 .70 .80 .90 1.0 1.3 1.5 1.8 2.2 2.6 2.8 4.0 5.0 5.5 6.4 7.8 9.0 current rating (amperes max.) 1.1 1.1 .88 .88 .88 .88 .70 .70 .70 .55 .55 .44 .44 .44 .44 .35 .27 .27 .27 .27 .27 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 inductance (mh 25%) @ 1 khz csz3033-xb rev. 1 7/18/02 e l e c t r o n i c s i n c . surface mount power inductors tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 epi d8763 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxd8763 rev. - 12/11/02 .78 1.5 2.2 3.3 3.9 4.7 6.0 7.8 10 15 induct. (h 20%) @ rated current .0026 .004 .0061 .0086 .010 .014 .017 .018 .026 .032 dcr ( ? max.) epi0l8303d8763 epi1l5253d8763 epi2l2203d8763 epi3l3173d8763 epi3l9153d8763 epi4l7133d8763 epi6l0123d8763 epi7l8113d8763 epi100103d8763 epi150802d8763 part number 30 25 20 17 15 13 12 11 10 8 i sat (amp) package d8763 notes : 1. temperature rise : 40c typ. @ i rms 2. inductance change at isat: 10% max. 15 15 12 10 9.0 8.4 7.5 7.5 6.0 4.4 i rms (amp) land pattern .125 (3.18) .340 (8.64) .815 (20.70) .565 (14.35) .315 max. (8.00) marking: pca epixxxxxd8763 .640 max. (16.26) .880 max. (22.35) ? virtually no limit on v sec as long as max. rms current limit and temperature rise limit are not exceeded ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? low cost robust construction to withstand most smt processes ? also suitable for use in high quality filter applications ? low profile version for high current applications .78 1.5 2.2 3.3 3.9 4.7 6.0 7.8 10 15 induct. (h 20%) @ 0 adc ? operating temperature : -40c to +85c ? e l e c t r o n i c s i n c . surface mount power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 features of the epi f1818 series ? used in pdas flash memory, digital cameras, communications equipment ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? low cost robust construction to withstand most smt processes ? also suitable for use in high quality filter applications ? operating temperature range : -40c to +105c ? ferrite materials epi f1818 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. package f1818 primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxf1818 rev. - 9/12/02 1.2 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 15 22 33 47 56 68 82 100 120 150 180 induct. (h 20%) @ 0 adc .024 .028 .031 .043 .049 .065 .072 .100 .108 .118 .128 .149 .235 .378 .587 .625 .699 .915 1.02 1.27 1.35 1.54 dcr ( ? max.) epi1l2252f1818 epi1l8222f1818 epi2l2202f1818 epi2l7162f1818 epi3l3152f1818 epi3l9142f1818 epi4l7132f1818 epi5l6112f1818 epi6l8112f1818 epi8l2102f1818 epi100102f1818 epi150761f1818 epi220701f1818 epi330561f1818 epi470481f1818 epi560411f1818 epi680351f1818 epi820321f1818 epi101291f1818 epi121271f1818 epi151241f1818 epi181221f1818 part number 2.56 2.20 2.04 1.60 1.57 1.44 1.32 1.17 1.12 1.04 1.00 0.76 0.70 0.56 0.48 0.41 0.35 0.32 0.29 0.27 0.24 0.22 idc (amp.) .118 max. (3.00) .195 .012 (4.70 .300) .195 .012 (4.70 .300) .208 (5.30) .208 (5.30) .059 (1.50) .177 (4.50) .177 (4.50) marking: pca inductance value e l e c t r o n i c s i n c . surface mount power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 features of the epi f1818l series ? used in pdas flash memory, digital cameras, communications equipment ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? low cost robust construction to withstand most smt processes ? also suitable for use in high quality filter applications ? operating temperature range : -40c to +105c ? ferrite materials epi f1818l series product performance is limited to specified parameters. data is subject to chan g e without prior notice. package f1818l primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxf1818l rev. - 9/12/02 1.0 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 induct. (h 20%) @ 0 adc .045 .075 .105 .110 .155 .162 .170 .200 .245 .200 .210 .240 .338 .397 .441 .694 .709 dcr ( ? max.) epi1l0172f1818l epi2l2132f1818l epi2l7122f1818l epi3l3102f1818l epi3l9881f1818l epi4l7841f1818l epi5l6801f1818l epi6l8761f1818l epi8l2681f1818l epi100601f1818l epi120561f1818l epi150501f1818l epi180481f1818l epi220411f1818l epi270351f1818l epi330321f1818l epi390301f1818l part number 1.72 1.32 1.28 1.04 0.88 0.84 0.80 0.76 0.68 0.61 0.56 0.50 0.48 0.41 0.35 0.32 0.30 idc (amp.) .079 max. (2.00) .195 .012 (4.70 .300) .195 .012 (4.70 .300) .208 (5.30) .208 (5.30) .059 (1.50) .177 (4.50) .177 (4.50) marking: pca inductance value e l e c t r o n i c s i n c . surface mount power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 features of the epi f2222 series ? used in pdas flash memory, digital cameras, communications equipment ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? low cost robust construction to withstand most smt processes ? also suitable for use in high quality filter applications ? operating temperature range : -40c to +105c ? ferrite materials epi f2222 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. package f2222 primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxf2222 rev. - 9/12/02 2.6 3.0 4.2 5.3 6.2 8.2 10 15 22 33 47 56 68 82 100 induct. (h 20%) @ 0 adc .018 .024 .031 .038 .045 .053 .065 .103 .122 .189 .260 .305 .355 .463 .520 dcr ( ? max.) epi2l6262f2222 EPI3L0242F2222 epi4l2222f2222 epi5l3192f2222 epi6l2182f2222 epi8l2162f2222 epi100132f2222 epi150112f2222 epi220901f2222 epi330751f2222 epi470621f2222 epi560581f2222 epi680521f2222 epi820461f2222 epi101421f2222 part number 2.6 2.4 2.2 1.9 1.8 1.6 1.3 1.1 .90 .75 .62 .58 .52 .46 .42 idc (amp.) .118 max. (3.00) .224 .012 (5.70 .300) .224 .012 (5.70 .300) .248 (6.30) .248 (6.30) .079 (2.00) .217 (5.50) .217 (5.50) marking: pca inductance value e l e c t r o n i c s i n c . surface mount power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? used in pdas, cell phones, digital cameras, mp3 players, low power cpu & dsp supply and organizers ? used as an inductor in ti tps6205x, tps6101x, tps6110x and tps6112x series applications ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor epi f2626 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. package f2626 primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxf2626 rev. 1 6/9/03 ff 3.3 5.0 6.2 7.4 8.7 10 15 22 33 47 56 68 82 100 induct. (h 20%) @ 0 adc .020 .024 .027 .031 .034 .038 .057 .096 .124 .155 .202 .234 .324 .358 dcr ( ? max.) epi3l3352f2626 epi5l0292f2626 epi6l2252f2626 epi7l4232f2626 epi8l7222f2626 epi100202f2626 epi150162f2626 epi220132f2626 epi330112f2626 epi470951f2626 epi560851f2626 epi680751f2626 epi820701f2626 epi101651f2626 part number 3.5 2.9 2.5 2.3 2.2 2.0 1.6 1.3 1.1 .95 .85 .75 .70 .65 idc (amp.) .157 max. (4.00) .264 .012 (6.70 .300) .264 .012 (6.70 .300) .287 (7.30) .287 (7.30) .079 (2.00) .256 (6.50) .256 (6.50) marking: pca inductance value applications input output @ 800 ma vin fb tps6205x sw sync lbo gnd en pg gnd lbi l1 co ci 1 8 6 7 9 5 4 2 310 tps6101x vout vbat lbi gnd low battery warning vout lbo en aden fb comp on on off off control inputs ci co r1 r2 r3 cc1 cc2 rc l2 sw 7 6 5 1 8 3 2 10 5 + - battery input e l e c t r o n i c s i n c . surface mount power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? used in pdas, cell phones, digital cameras, mp3 players, low power cpu & dsp supply and organizers ? used as an inductor in ti tps6205x, tps6101x, tps6110x and tps6112x series applications ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor epi f2626l series product performance is limited to specified parameters. data is subject to chan g e without prior notice. package f2626l primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxf2626l rev. 1 6/9/03 ff 3.0 3.9 5.0 6.1 7.3 8.6 10 15 22 33 47 56 68 82 100 induct. (h 20%) @ 0 adc .024 .027 .031 .035 .054 .058 .065 .084 .128 .165 .238 .277 .304 .390 .535 dcr ( ? max.) epi3l0302f2626l epi3l9262f2626l epi5l0242f2626l epi6l1222f2626l epi7l3212f2626l epi8l6182f2626l epi100172f2626l epi150142f2626l epi220122f2626l epi330971f2626l epi470801f2626l epi560731f2626l epi680651f2626l epi820601f2626l epi101541f2626l part number 3.00 2.60 2.40 2.25 2.10 1.85 1.70 1.40 1.20 0.97 0.80 0.73 0.65 0.60 0.54 idc (amp.) .118 max. (3.00) .264 .012 (6.70 .300) .264 .012 (6.70 .300) .287 (7.30) .287 (7.30) .079 (2.00) .256 (6.50) .256 (650) marking: pca inductance value applications input output @ 800 ma vin fb tps6205x sw sync lbo gnd en pg gnd lbi l1 co ci 1 8 6 7 9 5 4 2 310 tps6101x vout vbat lbi gnd low battery warning vout lbo en aden fb comp on on off off control inputs ci co r1 r2 r3 cc1 cc2 rc l2 sw 7 6 5 1 8 3 2 10 5 + - battery input e l e c t r o n i c s i n c . surface mount power inductors tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? used in pdas, cell phones, digital cameras, mp3 players, low power cpu & dsp supply and organizers ? used as an inductor in ti tps6205x, tps6110x and tps6112x series applications ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor epi f3030 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxf3030 rev. 1 8/21/02 10 15 18 22 33 39 47 56 68 82 100 150 220 330 470 560 680 820 1000 induct. (h 20%) @ 0 adc .049 .081 .091 .110 .170 ..230 .260 .350 .380 .420 .610 .880 1.70 1.86 3.01 3.62 4.63 5.20 6.00 dcr ( ? max.) epi100182f3030 epi150152f3030 epi180132f3030 epi220122f3030 epi330961f3030 epi390911f3030 epi470881f3030 epi560751f3030 epi680691f3030 epi820611f3030 epi101601f3030 epi151461f3030 epi221361f3030 epi331321f3030 epi471261f3030 epi561231f3030 epi681221f3030 epi821201f3030 epi102181f3030 part number 1.84 1.47 1.31 1.23 0.96 0.91 0.88 0.75 0.69 0.61 0.60 0.46 0.36 0.32 0.26 0.23 0.22 0.20 0.18 idc (amp) package f3030 .287 .008 (7.30 .200) .200 (5.10) .177 max. (4.50) recommended pad layout .138 (3.50) .150 (3.83 .335 (8.50) marking: pca inductance value .080 (2.03) .287 .008 (7.30 .200) note : 1. temperature rise : 40c max. @ idc 2. inductance change at idc : 10% typ. 3. inductance change at isat: 30% approximate. 3.17 2.48 2.22 2.13 1.73 1.54 1.41 1.27 1.19 1.11 0.99 0.81 0.66 0.54 0.46 0.40 0.38 0.35 0.31 isat (amp) battery tps6112x swn pgnd fb vbat lbi skipen gnd swp control outputs vcc1 vout en ldoen pgood lbo ldoout ldoin ldosense vcc2 on on on off off off control inputs l1 + - application e l e c t r o n i c s i n c . surface mount power inductors tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? used in pdas, cell phones, digital cameras, mp3 players, low power cpu & dsp supply and organizers ? used as an inductor in ti tps6205x, tps6110x and tps6112x series applications ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor epi f3030l series product performance is limited to specified parameters. data is subject to chan g e without prior notice. primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxf3030l rev. 1 1/28/03 10 12 15 18 22 33 39 47 56 68 82 100 120 150 220 330 470 560 680 820 1000 induct. (h 20%) @ 0 adc .072 .098 .130 .140 .190 .240 .320 .360 .470 .520 .690 .790 .890 1.27 1.65 2.62 4.18 4.67 5.73 6.54 9.44 dcr ( ? max.) epi100162f3030l epi120152f3030l epi150132f3030l epi180122f3030l epi220102f3030l epi330911f3030l epi390771f3030l epi470761f3030l epi560681f3030l epi680611f3030l epi820571f3030l epi101501f3030l epi121491f3030l epi151431f3030l epi221351f3030l epi331281f3030l epi471241f3030l epi561221f3030l epi681191f3030l epi821181f3030l epi102161f3030l part number 1.68 1.52 1.33 1.20 1.07 0.91 0.77 0.76 0.68 0.61 0.57 0.50 0.49 0.43 0.35 0.28 0.24 0.22 0.19 0.18 0.16 idc (amp) package f3030l .287 .008 (7.30 .200) .200 (5.10) .138 max. (3.50) recommended pad layout .138 (3.50) .150 (3.83 .335 (8.50) marking: pca inductance value .080 (2.03) .287 .008 (7.30 .200) note : 1. temperature rise : 40c max. @ idc 2. inductance change at idc : 20% typ. 3. inductance change at isat: 35% approximate. 2.10 1.90 1.66 1.50 1.33 1.13 0.96 0.95 0.85 0.76 0.71 0.62 0.61 0.53 0.43 0.35 0.30 0.27 0.23 0.22 0.20 isat (amp) battery tps6112x swn pgnd fb vbat lbi skipen gnd swp control outputs vcc1 vout en ldoen pgood lbo ldoout ldoin ldosense vcc2 on on on off off off control inputs l1 + - application e l e c t r o n i c s i n c . surface mount power inductors tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? used as an inductor in ti tps6103x series, single cell or dual cell boost converters ? used as an inductor in tis tps5431x & tps5461x series synchronous buck switcher with integrated fet (swift) application ? used in pdas flash memory, digital cameras, mp3 players & other portable equipment ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor epi f4040 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxf4040 rev. 3 6/9/03 ff 1.5 30% 2.5 30% 3.8 30% 5.2 30% 7.0 30% 10 20% 15 20% 22 20% 33 20% 47 20% 68 20% 100 20% 150 20% 220 20% 330 20% inductance (h) @ 0 adc .0081 .010 .013 .022 .027 .035 .050 .073 .093 .128 .213 .304 .506 .756 1.09 dcr ( ? max.) epi1l5103f4040 epi2l5752f4040 epi3l8602f4040 epi5l2552f4040 epi7l0482f4040 epi100442f4040 epi150362f4040 epi220292f4040 epi330232f4040 epi470212f4040 epi680152f4040 epi101132f4040 epi151112f4040 epi221921f4040 epi331701f4040 part number 10 7.5 6.0 5.5 4.8 4.4 3.6 2.9 2.3 2.1 1.5 1.35 1.15 0 .92 0.70 idc (amp) package f4040 notes : 1. temperature rise : 40c max. @ idc 2. inductance change at idc : 35% approximate. recommended pad layout .287 (7.30) .142 (3.60) .421 (10.70) .394 .012 (10.00 .300) .150 .008 (3.80 .200) .047 (1.20) marking: pca inductance value .118 (3.00) .402 .012 (10.20 .300) .303 (7.70) application input output vin boot tps5431x & tps5461x ph vbias vsense agnd pgnd l1 e l e c t r o n i c s i n c . surface mount power inductors tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? also suitable for use in high quality filter applications ? low profile version for high current applications epi f4747 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxf4747 rev. 2 8/26/02 10 15 18 22 33 39 47 56 68 82 100 150 220 330 470 560 680 820 1000 induct. (h 20%) @ 0 adc .022 .027 .040 .044 .065 .073 0 .10 0 .11 0 .14 0 .16 0 .22 0 .28 0 .39 0 .64 0 .98 1.07 1.46 1.64 1.82 dcr ( ? max.) epi100542f4747 epi150452f4747 epi180392f4747 epi220362f4747 epi330302f4747 epi390272f4747 epi470252f4747 epi560232f4747 epi680212f4747 epi820192f4747 epi101172f4747 epi151142f4747 epi221112f4747 epi331951f4747 epi471791f4747 epi561731f4747 epi681671f4747 epi821601f4747 epi102551f4747 part number 5.40 4.50 3.90 3.60 3.00 2.75 2.50 2.35 2.10 1.95 1.70 1.42 1.16 0.95 0.79 0.73 0.67 0.60 0.55 idc (amp) package f4747 .472 .012 (12.00 .300) .299 (7.60) .315 max. (8.00) recommended pad layout .276 (7.00) .213 (5.40) .504 (12.80) marking: pca inductance value .197 (5.00) .472 .012 (12.00 .300) note : 1. temperature rise : 40c max. @ idc 2. inductance change at idc : 10% approximate. e l e c t r o n i c s i n c . surface mount power inductors tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? used as an inductor in ti tps6103x series, single cell or dual cell boost converters ? used in pdas, mp3 players, camcorders, & other portable communication equip. ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? high current application ? low profile version epi f4747l series product performance is limited to specified parameters. data is subject to chan g e without prior notice. primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxf4747l rev. 2 6/9/03 10 15 18 22 33 39 47 56 68 82 100 150 220 330 470 560 680 820 1000 induct. (h 20%) @ 0 adc .025 .030 .034 .036 .068 .073 .075 .110 .120 .140 .160 .230 .400 .570 .770 .860 1.20 1.34 1.53 dcr ( ? max.) epi100402f4747l epi150332f4747l epi180302f4747l epi220282f4747l epi330212f4747l epi390202f4747l epi470182f4747l epi560172f4747l epi680152f4747l epi820142f4747l epi101132f4747l epi151102f4747l epi221801f4747l epi331681f4747l epi471581f4747l epi561541f4747l epi681481f4747l epi821431f4747l epi102401f4747l part number 4.0 3.3 3.0 2.8 2.1 2.0 1.8 1.7 1.5 1.4 1.3 1.0 .80 .68 .58 .54 .48 .43 .40 idc (amp) package f4747l .472 .012 (12.00 .300) .299 (7.60) .177 max. (4.50) recommended pad layout .276 (7.00) .213 (5.40) .504 (12.80) marking: pca inductance value .197 (5.00) .472 .012 (12.00 .300) note : 1. temperature rise : 40c max. @ idc 2. inductance change at idc : 10% approximate. application l1 h battery input sw tps6103x r1 r2 r4 r3 c1 fb pgnd lbo vbat lbi sync gnd en vout c2 c3 r6 + - vcc control output boost output e l e c t r o n i c s i n c . surface mount power inductors tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? used as an inductor in ti tps6103x series, single cell or dual cell boost converters ? used in pdas, mp3 players, camcorders, & other portable communication equip. ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? high current application ? low profile version epi f4747lp series product performance is limited to specified parameters. data is subject to chan g e without prior notice. primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxf4747lp rev. 1 6/9/03 3.9 4.7 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 induct. (h 20%) @ 0 adc .015 .018 .023 .026 .028 .038 .050 .057 .066 .080 .097 .132 .150 .190 .220 .260 .308 .380 .530 .620 .700 .870 .990 dcr ( ? max.) epi3l9652f4747lp epi4l7572f4747lp epi6l8492f4747lp epi8l2462f4747lp epi100452f4747lp epi120402f4747lp epi150322f4747lp epi180312f4747lp epi220292f4747lp epi270282f4747lp epi330272f4747lp epi390212f4747lp epi470192f4747lp epi560182f4747lp epi680152f4747lp epi820132f4747lp epi101122f4747lp epi121112f4747lp epi151951f4747lp epi181851f4747lp epi221801f4747lp epi271601f4747lp epi331501f4747lp part number 6.50 5.70 4.90 4.60 4.50 4.00 3.20 3.10 2.90 2.80 2.70 2.10 1.90 1.80 1.50 1.30 1.20 1.10 0.95 0.85 0.80 0.60 0.50 idc (amp) package f4747lp .472 .012 (12.00 .300) .299 (7.60) .177 max. (4.50) recommended pad layout .276 (7.00) .213 (5.40) .504 (12.80) marking: pca inductance value .197 (5.00) .472 .012 (12.00 .300) note : 1. temperature rise : 40c max. @ idc 2. inductance change at idc : 10% approximate. application l1 h battery input sw tps6103x r1 r2 r4 r3 c1 fb pgnd lbo vbat lbi sync gnd en vout c2 c3 r6 + - vcc control output boost output e l e c t r o n i c s i n c . surface mount power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? used in camcorders, lcd tvs, car radios, communications equipment ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? low cost robust construction to withstand most smt processes ? also suitable for use in high quality filter applications ? operating temperature range : -40c to +105c ? ferrite materials epi g1816 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. package g1816 primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxg1816 rev. - 9/17/02 1.0 1.4 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 induct. (h 10%) @ 0 adc .049 .057 .064 .072 .079 .087 .094 .109 .126 .132 .147 .182 .210 .235 .338 .378 .522 .540 .587 .844 .937 1.117 dcr ( ? max.) epi1l0252g1816 epi1l4252g1816 epi1l8192g1816 epi2l2172g1816 epi2l7152g1816 epi3l3142g1816 epi3l9132g1816 epi4l7112g1816 epi5l6991g1816 epi6l8951g1816 epi8l2841g1816 epi100102g1816 epi120971g1816 epi150851g1816 epi180741g1816 epi220681g1816 epi270621g1816 epi330561g1816 epi390521g1816 epi470441g1816 epi560421g1816 epi680371g1816 part number 2.56 2.52 1.95 1.75 1.58 1.44 1.33 1.15 0.99 0.95 0.84 1.04 0.97 0.85 0.74 0.68 0.62 0.56 0.52 0.44 0.42 0.37 idc (amps max.) note : 1. temperature rise : 40c typ. @ idc 2. inductance change at i saturation : 10% typ. .157 .012 (4.00 .300) .177 .012 (4.50 .300) .059 (1.50) .126 .012 (3.20 .300) recommended pad layout .071 (1.80) .201 (5.10) .177 (4.50) marking: pca inductance value e l e c t r o n i c s i n c . surface mount power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 features of the epi g4036 series ? used in camcorders, lcd tvs, car radios, communications equipment ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? low cost robust construction to withstand most smt processes ? also suitable for use in high quality filter applications ? operating temperature range : -40c to +105c ? ferrite materials epi g4036 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. package g4036 primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxg4036 rev. - 9/17/02 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 8200 induct. (h 10%) @ 0 adc .060 .070 .080 .090 .100 .110 .120 .140 .170 .190 .220 .250 .350 .400 .470 .630 .730 .970 1.15 1.30 1.48 1.90 2.25 2.55 2.75 26 dcr ( ? max.) epi100262g4036 epi120242g4036 epi150222g4036 epi180212g4036 epi220192g4036 epi270172g4036 epi330152g4036 epi390122g4036 epi470132g4036 epi560112g4036 epi680112g4036 epi820102g4036 epi101971g4036 epi121891g4036 epi151781g4036 epi181721g4036 epi221661g4036 epi271571g4036 epi331521g4036 epi391481g4036 epi471421g4036 epi561331g4036 epi681281g4036 epi821241g4036 epi102221g4036 epi822500g4036 part number 2.60 2.45 2.27 2.15 1.95 1.76 1.50 1.37 1.28 1.17 1.11 1.00 0.97 0.89 0.78 0.72 0.66 0.57 0.52 0.48 0.42 0.33 0.28 0.24 0.22 .050 idc (amps max.) note : 1. temperature rise : 40c typ. @ idc 2. inductance change at i saturation : 10% typ. .354 .016 (9.00 .400) .394 .016 (10.00 .400) .118 (3.00) .213 .016 (5.40 .400) recommended pad layout .148 (3.75) .374 (9.50) .394 (10.00) marking: pca inductance value e l e c t r o n i c s i n c . surface mount power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 features of the epi g4036l series ? used in camcorders, lcd tvs, car radios, communications equipment ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? low cost robust construction to withstand most smt processes ? also suitable for use in high quality filter applications ? operating temperature range : -40c to +105c ? ferrite materials epi g4036l series product performance is limited to specified parameters. data is subject to chan g e without prior notice. package g4036l primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxg4036l rev. - 9/17/02 10 12 15 18 22 27 33 39 47 56 68 82 100 150 180 220 270 330 390 470 560 induct. (h 10%) @ 0 adc .053 .061 .070 .081 .088 .100 .120 .151 .170 .199 .233 .252 .344 .544 .621 .721 .949 1.10 1.245 1.526 1.904 dcr ( ? max.) epi100232g4036l epi120212g4036l epi150182g4036l epi180172g4036l epi220162g4036l epi270142g4036l epi330122g4036l epi390122g4036l epi470112g4036l epi560102g4036l epi680911g4036l epi820851g4036l epi101741g4036l epi151611g4036l epi181561g4036l epi221531g4036l epi271451g4036l epi331421g4036l epi391381g4036l epi471351g4036l epi561321g4036l part number 2.38 2.13 1.87 1.73 1.60 1.44 1.26 1.20 1.10 1.01 0.91 0.85 0.74 0.61 0.56 0.53 0.45 0.42 0.38 0.35 0.32 idc (amps max.) note : 1. temperature rise : 40c typ. @ idc 2. inductance change at i saturation : 10% typ. .354 .016 (9.00 .400) .394 .016 (10.00 .400) .118 (3.00) .157 .020 (4.00 .500) recommended pad layout .148 (3.75) .374 (9.50) .394 (10.00) marking: pca inductance value e l e c t r o n i c s i n c . surface mount power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 features of the epi ksp45 series ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? also suitable for use in high quality filter applications and as a coupled inductor ? low cost robust construction to withstand most smt processes epi ksp45 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxksp45a rev. 1 12/11/02 2.2 0.55 3.4 0.85 4.8 1.2 8.8 2.2 19.6 4.9 30.4 7.6 39.2 9.8 60.0 15.0 78.4 19.6 inductance (h 20%) @ 0 adc dcr ( ? max.) .024 .006 .029 .007 .033 .008 .055 .014 .128 .032 .158 .040 .179 .045 .339 .085 .387 .097 i dc (amps) 2.95 5.90 2.70 5.40 2.50 5.00 1.95 3.90 1.25 2.50 1.15 2.30 1.05 2.10 0.80 1.60 0.75 1.50 part number epi0l4592ksp45 epi0l6542ksp45 epi0l8502ksp45 epi1l5392ksp45 epi3l5252ksp45 epi5l3232ksp45 epi6l7212ksp45 epi100162ksp45 epi130152ksp45 package ksp45 .460 max. (11.68) .460 max. (11.68) pin 1 i.d. .235 max. (5.97) .350 (8.89) .350 (8.89) top view bottom view 4 3 2 1 marking : pca inductance value d.c. .145 (3.68) .392 (9.96) .120 (3.05) .422 (10.72) .277 (7.04) recommended layout 1. temperature rise : 40c max. @ idc 2. inductance change at idc : 40% max. notes : schematic 14 3 2 series parallel series parallel series parallel series parallel series parallel series parallel series parallel series parallel series parallel connection 1.6 0.4 2.4 0.6 3.2 0.8 6.0 1.5 14 3.5 21.2 5.3 26.8 6.7 40 10 52 13 inductance (h min.) @ idc e l e c t r o n i c s i n c . surface mount power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 features of the epi ksp45l series ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? also suitable for use in high quality filter applications and as a coupled inductor ? low cost robust construction to withstand most smt processes epi ksp45l series product performance is limited to specified parameters. data is subject to chan g e without prior notice. primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxksp45la rev. 1 12/11/02 1.6 .40 2.4 .60 4.4 1.1 8.0 2.0 19.2 4.8 32.4 8.1 38.4 9.6 60 15.0 82 20.5 inductance (h 20%) @ 0 adc dcr ( ? max.) .024 .006 .028 .007 .032 .008 .056 .014 .164 .041 .208 .052 .228 .057 .348 .087 .636 .159 i dc (amps) 2.75 5.5 2.55 5.1 2.25 4.5 1.7 3.4 1.0 2.0 0.90 1.8 0.85 1.7 0.70 1.4 0.50 1.0 part number epi0l3552ksp45l epi0l4512ksp45l epi0l7452ksp45l epi1l3342ksp45l epi3l3202ksp45l epi5l3182ksp45l epi6l2172ksp45l epi9l6142ksp45l epi140102ksp45l package ksp45l .460 max. (11.68) .460 max. (11.68) pin 1 i.d. .165 max. (54.19) .350 (8.89) .350 (8.89) top view bottom view 4 3 2 1 marking : pca inductance value d.c. .145 (3.68) .392 (9.96) .120 (3.05) .422 (10.72) .277 (7.04) recommended layout 1. temperature rise : 40c max. @ idc 2. inductance change at idc : 40% max. notes : schematic 14 3 2 series parallel series parallel series parallel series parallel series parallel series parallel series parallel series parallel series parallel connection 1.2 0.3 1.6 0.4 2.8 0.7 5.2 1.3 13.2 3.3 21.2 5.3 24.8 6.2 38.4 9.6 56.0 14.0 inductance (h min.) @ idc e l e c t r o n i c s i n c . surface mount power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 features of the epi ksp56 series ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? also suitable for use in high quality filter applications and as a coupled inductor ? low cost robust construction to withstand most smt processes epi ksp56 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxksp56a rev. 1 12/11/02 1.76 0.44 3.10 0.78 4.80 1.20 7.00 1.76 19.6 4.90 33.2 8.30 38.4 9.60 56.8 14.2 78.4 19.6 inductance (h 20%) @ 0 adc dcr ( ? max.) .016 .004 .020 .005 .024 .006 .028 .007 .056 .014 .076 .019 .080 .020 .096 .024 .220 .055 i dc (amps) 3.5 7.0 3.0 6.0 2.5 5.0 2.45 4.9 2.2 4.4 1.75 3.5 1.7 3.4 1.5 3.0 1.05 2.1 part number epi0l3702ksp56 epi0l5602ksp56 epi0l8502ksp56 epi1l1492ksp56 epi2l6442ksp56 epi4l3352ksp56 epi4l8342ksp56 epi6l8302ksp56 epi100212ksp56 package ksp56 1. temperature rise : 40c max. @ idc 2. inductance change at idc : 40% max. notes : schematic 14 3 2 series parallel series parallel series parallel series parallel series parallel series parallel series parallel series parallel series parallel connection 1.2 .30 2.0 .50 3.2 .80 4.4 1.1 10.4 2.6 17.2 4.3 19.2 4.8 27.2 6.8 40.0 10.0 inductance (h min.) @ idc .560 max. (14.22) .560 max. (14.22) pin 1 i.d. .250 max. (6.35) .460 (11.68) .460 (11.68) top view bottom view 4 3 2 1 marking : pca inductance value d.c. .160 (4.06) .492 (12.50) .120 (3.05) .492 (12.50) .348 (8.84) recommended layout pca part no. inductance (h) dcr ( ? max.) idc (a) inductance l w h epi-a106 toroid series .85 - 1000 .0005 - .88 1.20 - 43 .7 - 800 1.40 1.40 .500 epi-a38hm toroid series 9.6 - 19.6 .14 - 13.5 3.2 - 4.7 6.7 - 13.5 .535 .449 .449 epi-ac1 toroid series 13.5 - 20 .022 - .035 3.5 - 4.5 10 - 15 .590 .360 .715 epi-ac2 toroid series 12.8 - 27 .012 - .046 3.0 - 5.0 10 - 22 .680 .470 .750 epi-ac3 toroid series 27 - 265 .025 - .394 1.5- 5.0 22 - 220 .840 .470 .950 epi-ac4 toroid series 42 - 493 .027 - 7.54 1.0 - 5.5 33 - 470 .960 .610 1.35 epi-ac5 toroid series 260 - 1093 .090 - .297 .95 - 3.0 220 - 1000 1.30 .700 1.40 epi-ah50 toroid series 220 - 1216 .21 - 1.20 .5 - 1.7 150 - 1000 .710 .710 .460 epi-av50 toroid series 220 - 1216 .21 - 1.20 .5 - 1.7 150 - 1000 .710 .510 .710 epi-avm1 toroid series 50 - 152 .54 - .124 2.1 - 2.6 35 - 105 .772 .425 .952 epi-avm2 toroid series 9 - 500 .0066 - .419 1.0 - 8.7 6.7 - 413 1.25 .625 1.185 epi-avm3 toroid series 10 - 1028 .006 - .810 1.0 - 11.4 7 - 880 1.35 .825 1.36 epi-rl30 drum series 1 - 10000 .013 - 33 .084 - 10 1 -10000 .307 .307 .295 contents thru hole power inductor series e l e c t r o n i c s i n c . thru-hole power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? also suitable for use in high quality filter applications ? max. temperature rise of 40c ? low cost inductor epi a106 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxa106 rev. 2 3/5/03 .85 1.5 2.2 3.3 4.7 6.0 9.5 15 20 33 47 55 68 100 150 220 280 330 470 680 1000 induct. (h 15%) @ 0 adc dcr ( ? typ.) .0005 .0011 .0013 .002 .003 .005 .006 .007 .010 .013 .015 .016 .02 .04 .06 .12 .14 .16 .30 .46 .88 i saturation (amperes) 43 32 26 21 18 16 13 10 8.6 6.8 5.9 5.4 4.8 3.9 3.2 2.7 2.4 2.2 1.8 1.5 1.20 part number epi0l8433a106 epi1l5323a106 epi2l2263a106 epi3l3213a106 epi4l7183a106 epi6l0163a106 epi9l5133a106 epi150103a106 epi200862a106 epi330682a106 epi470592a106 epi550542a106 epi680482a106 epi101392a106 epi151322a106 epi221272a106 epi281242a106 epi331222a106 epi471182a106 epi681152a106 epi102122a106 i rms (amperes) 40 30 25 20 18 15 12 10 8.6 6.8 5.9 5.4 4.8 3.9 3.2 2.7 2.4 2.2 1.8 1.5 1.2 lead diameter (inch/mm) .102/2.59 .081/2.06 .081/2.06 .072/1.83 .064/1.63 .057/1.45 .057/1.45 .057/1.45 .051/1.30 .051/1.30 .051/1.30 .051/1.30 .051/1.30 .040/1.02 .036/.910 .029/.740 .025/.640 .025/.640 .020/.510 .018/.460 .016/.410 isat c (max.) 35.0 38.03 5.0 35.0 36.0 40.0 37.0 32.0 33.0 31.0 30.0 29.0 29.0 31.0 31.0 34.0 34.0 33.0 38.0 37.0 40.0 temp.rise vt (v-sec) 10 16 20 25 30 32 40 50 60 80 90 100 110 130 160 200 220 240 290 340 400 package 1.40 max. (35.56) .375 ( 9.53) 1.40 max. (35.56) .500 (12.70) .700 max. (17.79) ? core loss at ref. vt : 1.28 watts ? inductance change @ isat : 20% max. ? e l e c t r o n i c s i n c . thru-hole power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 features of the epi a38hm series ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? also suitable for use in high quality filter applications ? up to 500 khz switching frequency ? ul 1446 class b insulation system ? ul 94v-0 recognized material ? in header mount package ? low cost inductor epi a38hm series product performance is limited to specified parameters. data is subject to chan g e without prior notice. primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxa38hm rev. - 11/19/02 9.6 induct. (h 20%) @ 0 adc .014 dcr ( ? typ.) epi100452a38hm part number 4700 idc (ma) 6.7 induct. (h 15%) @ i sat 4500 i sat (ma) 32.3 core loss @ vt (mw) 6.6 vt (v-sec.) @ 100 khz 67.1 energy (j) @ i sat 35 temp. rise @ idc (c) epi200322a38hm 19.6 .032 3200 13.5 3200 32.3 9.4 69 39 package a38hm .535 max. (13.60) .449 max. (11.40) .425 (10.80) .449 max. (11.40) marking: pca inductance value .425 (10.80) .295 (7.50) .150 .039 (3.80 1.00) .020 ? (.500) .027 ? (.700) 1 23 4 schematic 1 3 e l e c t r o n i c s i n c . thru-hole power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? optimized for nationals lm267x & lm259x series ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? also suitable for use in high quality filter applications ? 150 khz & 260 khz switching frequency ? low cost inductor epi ac1 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxac1 rev. 3 2/22/05 13.5 20.0 20.0 induct. (h 15%) @ 0 adc dcr ( ? typ.) 0.022 0.035 0.035 vt1 (v-sec) 150 khz --- --- 12.7 @ vt1 c (typ.) --- --- 43 induct. (h 10%) @ idc 10 15 15 part number epi100452ac1 epi150352ac1 epi150352ac1 core loss idc (ma) 4500 3500 3500 vt2 (v-sec) 260 khz 7.2 8.7 --- national semiconductor chip lm267x-l45 lm267x-l34 lm259x-l34 @ vt2 c (typ.) 45 43 --- temp.rise --- --- 55 @ vt1 (mw) @ vt2 (mw) 55 55 --- package ac1 .715 max. (18.16) .110/.150 (2.79/3.81) .580 max. (14.99) .220 (5.59) .360 9.14) .220 (5.59) pad layout .060 ? (1.52) .290 (7.37) applications vin vout lx h d1 8v-40v cin cout cb 10nf fb vsw gnd on/off lm267x + + +vin regulated output load lx h d1 1n5822 cin cout feedback output vsw on/off gnd lm259x + + unregulated dc input package ac1v .375 .125 (9.53 3.18) .550 max. (13.97) pad layout .185 (4.70) .060 ? (1.52) .250 max. (6.35) .185 (4.70) package ac1h .375 .125 (9.53 3.18) .550 max. (13.97) pad layout .465 (11.81) .060 ? (1.52) .550 max. (13.97) .465 (11.81) for no header version : add v for vertical mount and add h for horizonal mount e l e c t r o n i c s i n c . thru-hole power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? optimized for nationals lm267x & lm259x series ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? also suitable for use in high quality filter applications ? 150 khz & 260 khz switching frequency ? low cost inductor epi ac2 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxac2 rev. 5 2/22/05 ft 12.8 20 27 induct. (h 15%) @ 0 adc dcr ( ? typ.) 0.012 0.019 0.046 vt1 (v-sec) 150 khz --- --- 20.0 @ vt1 c (typ.) --- --- 33 induct. (h 10%) @ idc 10 15 22 part number epi100502ac2 epi150502ac2 epi220302ac2 core loss idc (ma) 5000 5000 3000 vt2 (v-sec) 260 khz 15.4 19.3 --- national semiconductor chip lm267x-l47 lm267x-l46 lm259x-l41 @ vt2 c (typ.) 36 45 --- temp.rise --- --- 105 @ vt1 (mw) @ vt2 (mw) 275 275 --- package ac2 .750 max. (19.05) .110/.150 (2.79/3.81) .680 max. (17.27) .300 (7.62) .470 max. (11.94) .300 (7.62) pad layout .060 ? (1.52) .335 (8.51) applications vin vout lx h d1 8v-40v cin cout cb 10nf fb vsw gnd on/off lm267x + + +vin regulated output load lx h d1 1n5822 cin cout feedback output vsw on/off gnd lm259x + + unregulated dc input package ac2v .375 .125 (9.53 3.18) .680 max. (17.27) pad layout .280 (7.11) .060 ? (1.52) .400 max. (10.16) .280 (7.11) package ac2h .375 .125 (9.53 3.18) .680 max. (17.27) pad layout .530 (13.46) .060 ? (1.52) .680 max. (17.27) .530 (13.46) for no header version : add v for vertical mount and add h for horizonal mount e l e c t r o n i c s i n c . thru-hole power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? optimized for nationals lm267x & lm259x series ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? also suitable for use in high quality filter applications ? 150 khz & 500 khz switching frequency ? low cost inductor epi ac3 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxac3 rev. 5 2/22/05 ft 27 27 40 38 60 60 87 87 91 91 128 194 265 induct. (h 20%) @ 0 adc dcr ( ? typ.) 0.025 0.025 0.038 0.046 0.074 0.074 0.090 0.090 0.091 0.091 0.110 0.260 0.394 vt1 (v-sec) 150 khz --- --- --- 33.4 40.0 --- 46.7 --- 26.7 --- 55.4 56.7 73.4 @ vt1 c (typ.) --- --- --- 31 42 --- 37 --- 43 --- 33 43 39 induct. (h 15%) @ idc 22 22 33 33 47 47 68 68 68 68 100 150 220 part number epi220502ac3 epi330402ac3 epi330352ac3 epi470352ac3 epi680302ac3 epi680352ac3 epi101252ac3 epi151202ac3 epi221152ac3 core loss idc (ma) 5000 5000 4000 3500 3500 3500 3000 3000 3500 3500 2500 2000 1500 vt2 (v-sec) 260 khz 23.1 23.1 27.0 --- --- 28.5 --- 30.8 --- 12.7 --- --- -- national semiconductor chip lm267x-l41 lm267x-l50 lm267x-l40 lm259x-l40 lm259x-l39 lm267x-l39 lm259x-l38 lm267x-l38 lm267x-l44 lm259x-l44 lm259x-l37 lm259x-l36 lm259x-l35 @ vt2 c (typ.) 35 35 34 --- --- 42 --- 37 --- 44 --- --- --- temp.rise --- --- --- 210 185 --- 155 --- 45 --- 155 113 134 @ vt1 (mw) @ vt2 (mw) 290 290 260 --- --- 185 --- 155 --- 60 --- --- -- package ac3 .950 max. (24.13) .110/.150 (2.79/3.81) .840 max. (21.33) .300 (7.62) .470 max. (11.94) .300 (7.62) pad layout .060 ? (1.52) .415 (10.54) applications vin vout lx h d1 8v-40v cin cout cb 10nf fb vsw gnd on/off lm267x + + +vin regulated output load lx h d1 1n5822 cin cout feedback output vsw on/off gnd lm259x + + unregulated dc input package ac3v .375 .125 (9.53 3.18) .840 max. (21.33) pad layout .280 (7.11) .060 ? (1.52) .470 max. (11.94) .280 (7.11) package ac3h .375 .125 (9.53 3.18) .840 max. (21.33) pad layout .720 (18.29) .060 ? (1.52) .840 max. (21.33) .720 (18.29) for no header version : add v for vertical mount and add h for horizonal mount e l e c t r o n i c s i n c . thru-hole power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? optimized for nationals lm267x,lm259x & lm257x series ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? 52 khz, 150 khz & 260 kh khz switching frequency ? also suitable for use in high quality filter applications ? low cost inductor epi ac4 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxac4 rev. 5 2/22/05 ft 42 64 78 121 130 173 196 202 493 induct. (h 15%) @ 0 adc dcr ( ? typ.) .027 .042 .061 .093 .125 .144 .188 .191 .754 induct. (h 15%) @ idc 33 47 68 100 100 150 150 150 470 part number epi330552ac4 epi470552ac4 epi680302ac4 epi101302ac4 epi101342ac4 epi151202ac4 epi151272ac4 epi151302ac4 epi471102ac4 core loss idc (ma) 5500 5500 3000 3000 3400 2000 2700 3000 1000 national semiconductor chip lm267x-l49 lm267x-l48 lm257x-l68 lm257x-100 lm257x-l43 lm257x-l150 lm259x-l42 lm257x-h150 lm257x-l470 --- --- --- --- 320 --- 320 --- --- @ vt1 (mw) @ vt2 (mw) 445 380 --- --- --- --- --- --- --- package ac4 1.350 max. (34.29) .110/.150 (2.79/3.81) .950 max. (24.13) .450 (11.43) .610 max. (15.49) .450 (11.43) pad layout .060 ? (1.52) .475 (12.07) vt1 (v-sec) 150 khz --- --- --- --- 81.4 --- 90.7 --- --- vt2 (v-sec) 260 khz 36.6 42.4 --- --- --- --- --- --- --- @ vt c (typ.) 34 @ vt2 42 @ vt2 24 @ vt3 28 @ vt3 44 @ vt1 24 @ vt3 43 @ vt1 55 @ vt3 27 @ vt3 temp.rise @ vt3 (mw) --- --- 300 180 --- 125 --- 550 213 vt3 (v-sec) 52 khz --- --- 96.2 96.2 --- 96.2 --- 207.7 207.7 applications vin vout lx h d1 8v-40v cin cout cb 10nf fb vsw gnd on/off lm267x + + +vin +5v regulated output load lx h d1 1n5822 cin cout feedback output vsw on/off gnd lm257x + + 7v-40v (60v for hv) unregulated dc input package ac4v .375 .125 (9.53 3.18) .950 max. (24.13) pad layout .400 (10.16) .060 ? (1.52) .550 max. (13.97) .400 (10.16) package ac4h .375 .125 (9.53 3.18) .950 max. (24.13) pad layout .840 (21.34) .060 ? (1.52) .950 max. (24.13) .840 (21.34) for no header version : add v for vertical mount and add h for horizonal mount e l e c t r o n i c s i n c . thru-hole power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? optimized for nationals lm257x series ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? also suitable for use in high quality filter applications ? 52 khz switching frequency ? low cost inductor epi ac5 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxac5 rev. 2 2/22/05 ft 260 437 542 757 1093 induct. (h 20%) @ 0 adc dcr ( ? typ.) .090 .117 .210 .247 .297 vt1 (v-sec) 52 khz 230.8 230.8 230.8 230.8 230.8 induct. (h 10%) @ idc 220 330 470 680 1000 part number epi221302ac5 epi331302ac5 epi471202ac5 epi681132ac5 epi102951ac5 idc (ma) 3000 3000 2000 1300 950 national semiconductor chip lm257x-h220 lm257x-h330 lm257x-h470 lm257x-h680 lm257x-h1000 @ vt1 c (typ.) 23 26 20 12 9 temp.rise core loss 510 280 210 150 110 @ vt1 (mw) package ac5 1.400 max. (35.56) .110/.150 (2.79/3.81) 1.300 (33.02) .500 (12.70) .700 (19.78) .500 (12.70) pad layout .060 ? (1.52) .625 (15.75) applications +vin +5v regulated output load lx h d1 1n5822 cin cout feedback output vsw on/off gnd lm257x + + 7v-40v (60v for hv) unregulated dc input package ac5v .375 .125 (9.53 3.18) 1.300 max. (33.02) pad layout .500 (12.70) .060 ? (1.52) .700 max. (19.78) .500 (12.70) package ac5h .375 .125 (9.53 3.18) 1.300 max. (33.02) pad layout 1.100 (27.94) .060 ? (1.52) 1.300 max. (33.02) 1.100 (27.94) for no header version : add v for vertical mount and add h for horizonal mount e l e c t r o n i c s i n c . thru-hole power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? inductor with varying volt-seconds and low core loss ? also suitable for use in high quality filter applications ? low cost & low proflie thru hole inductor ? 50 khz & 500 khz switching frequency epi ah50 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxah50 rev. 1 3/5/03 220 326 430 636 1002 1155 1216 induct. (h 20%) @ 0 adc dcr ( ? typ.) 0.21 0.31 0.57 0.70 0.87 1.17 1.20 vt1 (v-sec) 96.2 96.2 111.6 134.7 169.3 182.7 186.6 induct. (h 15%) @ idc 150 220 330 470 680 820 1000 part number epi151172ah50 epi221152ah50 epi331102ah50 epi471901ah50 epi681851ah50 epi821751ah50 epi102501ah50 idc (ma) 1700 1500 1000 900 850 750 500 @ vt1 c (typ.) 41 46 39 40 42 41 25 temp.rise package ah50 .460 max. (11.68) .120/.170 (3.05/4.32) .710 max. (18.03) .400 (10.16) .710 max. (18.03) .400 (10.16) pad layout .070 ? (1.78) .600 ( 15.24) .600 (15.24) e l e c t r o n i c s i n c . thru-hole power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? inductor with varying volt-seconds and low core loss ? also suitable for use in high quality filter applications ? low cost & low proflie thru hole inductor ? 50 khz & 500 khz switching frequency epi av50 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxav50 rev. 1 3/5/03 220 326 430 636 1002 1155 1216 induct. (h 20%) @ 0 adc dcr ( ? typ.) 0.21 0.31 0.57 0.70 0.87 1.17 1.20 vt1 (v-sec) 96.2 96.2 111.6 134.7 169.3 182.7 186.6 induct. (h 15%) @ idc 150 220 330 470 680 820 1000 part number epi151172ah50 epi221152ah50 epi331102ah50 epi471901ah50 epi681851ah50 epi821751ah50 epi102501ah50 idc (ma) 1700 1500 1000 900 850 750 500 @ vt1 c (typ.) 41 46 39 40 42 41 25 temp.rise package av50 .460 max. (11.68) .120/.170 (3.05/4.32) .710 max. (18.03) .400 (10.16) .510 max. (12.95) .400 (10.16) pad layout .070 ? (1.78) .600 ( 15.24) .600 (15.24) e l e c t r o n i c s i n c . thru-hole power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 features of the epi avm1 series ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? also suitable for use in high quality filter applications ? up to 500 khz switching frequency ? ul 1446 class b insulation system ? ul 94v-0 recognized material ? in vertical mount package ? low cost inductor epi avm1 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. package avm1 primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxavm1 rev. - 11/25/02 epi500272avm1 epi101242avm1 epi151232avm1 part number 50.29 100.38 151.69 induct. (h 20%) @ 0 adc .054 .097 .124 dcr ( ? typ.) 2.6 2.5 2.1 idc (a) 35.0 69.3 105.3 induct. (h 15%) @ i sat 2.7 2.4 2.3 i sat (a) 33 51 58 core loss (mw) @ vt 16.3 27.5 35.7 vt (v-sec.) @ 100 khz 128 200 279 energy (j) @ i sat 26.5 33 25 temp. rise @ idc (c) bottom view .600 (15.24) .250 (6.35) .049 ? (1.25 ?) .952 max. (24.20) .150 (3.81) .772 max. (19.60) .600 (15.24) .425 (10.80) .705 max. (17.91) 32 41 marking: pca epixxxxxxavm1 d.c. .250 (6.35) 1 .040 ? (1.02 ?) schematic 1 3 e l e c t r o n i c s i n c . thru-hole power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 features of the epi avm2 series ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? also suitable for use in high quality filter applications ? up to 500 khz switching frequency ? ul 1446 class b insulation system ? ul 94v-0 recognized material ? in header mount package ? low cost inductor epi avm2 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. package avm2 primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxavm2 rev. 1 1/23/03 epi100113avm2 epi100153avm2 epi220802avm2 epi330802avm2 epi470802avm2 epi500492avm2 epi530902avm2 epi560802avm2 epi680802avm2 epi820902avm2 epi101402avm2 epi151402avm2 epi151402avm2b epi221202avm2 epi251222avm2 epi331202avm2 epi471102avm2 epi501332avm2 part number 9.68 10.82 23.10 33.86 47.32 50.00 53.82 54.88 69.70 82.94 102.40 148.00 153.66 222.78 250.88 331.78 473.34 499.39 induct. (h 20%) @ 0 adc .0066 .006 .009 .011 .020 .023 .017 .021 .025 .021 .048 .060 .077 .147 .161 .221 .419 .149 dcr ( ? typ.) 8.7 15 8 8 8 4.9 9 8 8 9 4 4.3 4 2 1.9 2 1 3.1 idc (a) 6.7 7.0 16.8 22.6 25.9 34.5 29.42 28.5 37.6 39.26 73 104 99 178 173 248 413 346 induct. (h 15%) @ i sat 11.1 15 8 8 8 4.9 9 8 8 9 4 4 4 2 2.2 2 1 3.3 i sat (a) 61 91 91 91 148 49 91 160 91 91 91 99 91 91 61 91 91 133 core loss (mw) @ vt 9.4 12 18 21.8 25.5 21.3 21 28.5 31 25.5 38 47.6 46.5 56 47.8 68 82 104 vt (v-sec.) @ 100 khz 412 787 537 722 828 415 1192 913 1204 1590 584 829 795 357 419 496 207 1885 energy (j) @ i sat 20 33 17 20 32 21 33 34 37 40 21 24 30 17 23 23 14 20 temp. rise @ idc (c) marking: pca epixxxxxxavm2 d.c. bottom view .800 (20.32) .625 max. (15.88) .400 (10.16) 32 1 4 1.185 max. (30.10) .200 .020 (5.08 .500) .054 ? max. (1.37 ?) 1.250 max. (31.75) schematic a 1 3 schematic b 1 2 a b b b b a a b b a b a b b a b b a schematic .800 (20.32) .400 (10.16) .057 ? max. (1.45 ?) 1 e l e c t r o n i c s i n c . thru-hole power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 features of the epi avm3 series ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? also suitable for use in high quality filter applications ? up to 500 khz switching frequency ? ul 1446 class b insulation system ? ul 94v-0 recognized material ? in header mount package ? low cost inductor epi avm3 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. package avm3 primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxavm3 rev. - 11/25/02 epi100132avm3 epi200142avm3 epi200932avm3 epi220153avm3 epi470153avm3 epi500942avm3 epi500102avm3 epi101752avm3 epi101802avm3 epi101432avm3 epi151752avm3 epi251422avm3 epi471202avm3 epi501192avm3 epi681102avm3 epi751342avm3 epi751242avm3 epi102212avm3 epi102102avm3 part number 10.04 20.96 21.25 21.38 45.98 49.60 52.27 97.22 95.32 101.68 150.58 251.10 478.90 504.97 686.38 749.33 754.42 1004.40 1027.52 induct. (h 20%) @ 0 adc .006 .009 .011 .009 .010 .017 .015 .024 .030 .038 .030 .077 .268 .267 .662 .169 .341 .510 .810 dcr ( ? typ.) 11.4 11.4 7.8 15 15 7.6 10.5 8.2 8.0 4.4 7.7 4.2 2.0 1.7 1.0 3.4 1.8 1.5 1.0 idc (a) 7 14.6 14.8 13.6 23.3 34.6 36.4 65 48 71 105 175 374 352 613 522 526 700 880 induct. (h 15%) @ i sat 13.5 14.5 9.3 15 15 9.4 10.2 7.5 8.0 4.3 7.5 4.2 2.0 1.9 1.0 3.4 2.4 2.1 1.0 i sat (a) 77 106 77 107 107 106 134 134 171 77 171 106 107 77 107 171 106 106 107 core loss (mw) @ vt 11.0 19.0 16.0 19.2 28.1 29.5 33.5 45.7 42.0 35.0 66.0 66.0 91.0 77.9 109 147.3 114.3 131.9 133 vt (v-sec.) @ 100 khz 638 1535 640 1531 2621 1527 1894 1823 1544 655 2951 1543 747 635 307 3017 1514 1543 440 energy (j) @ i sat 21 20 19 34 38 18 23 26 34 20 18 22 21 21 15 19 19 20 17 temp. rise @ idc (c) marking: pca epixxxxxxavm3 d.c. bottom view .900 (22.86) 8.25 max. (20.96) .600 (15.24) 32 1 4 1.360 max. (34.54) .200 .020 (5.08 .500) .054 ? max. (1.37 ?) 1.350 max. (34.29) schematic a 1 3 schematic b 1 2 a a a b b a a a b a a a b a b a a a b schematic .900 (22.86) .600 (15.24) .057 ? max. (1.45 ?) 1 e l e c t r o n i c s i n c . radial lead power inductor tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? virtually no limit on v sec. as long as max. rms current limit and temperature rise limit are not exceeded ? low loss material ensures operation in high frequency switching converters, such as buck, boost or as output averaging filter inductor ? also suitable for use in high quality filter applications ? low cost robust construction to withstand most smt processes epi rl30 series product performance is limited to specified parameters. data is subject to chan g e without prior notice. primary specification unless otherwise specified dimensions are in inches /mm .010 /.25 csixxxxxxrl30a rev. 3 12/12/02 1.0 20% 1.5 20% 2.2 20% 3.3 20% 4.7 20% 6.8 20% 10 20% 12 20% 15 10% 18 10% 22 10% 27 10% 33 10% 39 10% 47 10% 56 10% 68 10% 82 10% 100 10% 120 10% 150 10% 180 10% inductance (h) @ 0 adc dcr ( ? max.) 0.013 0 .016 0 .021 0 .025 0 .030 0 .035 0.05 0.06 0.07 0.08 0.09 0.11 0.13 0.14 0.15 0.18 0.20 0.24 0.28 0.36 0.42 0.57 i dc (ma max.) 10000 8500 6500 5500 4300 3700 2900 2500 2200 1900 1800 1700 1500 1300 1300 1200 1100 1000 890 810 720 660 test frequency (mhz typ.) 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 1.0 1.0 1.0 1.0 part number (add a for heat shrink tube) epi1l0103rl30 epi1l5852rl30 epi2l2652rl30 epi3l3552rl30 epi4l7432rl30 epi6l8372rl30 epi100292rl30 epi120252rl30 epi150222rl30 epi180192rl30 epi220182rl30 epi270172rl30 epi330152rl30 epi390132rl30 epi470132rl30 epi560122rl30 epi680112rl30 epi820102rl30 epi101891rl30 epi121811rl30 epi151721rl30 epi181661rl30 package rl30a (with heat shrink tube) note : 1. temperature rise : 40c max. @ idc 2. inductance drop : 10% max. @ idc 3. leads are pre-tinned .295 (7.50) .307 typ. (7.80) .0275 (.700) .197 (5.00) .197 .012 (5.00 .300) .295 (7.50) .307 .020 (7.80 .500) .0275 (.700) .197 (5.00) .197 .012 (5.00 .300) package rl30 (without heat shrink tube) products and applications: local area networking telecommunication broadband power magnetics integrated magnetics delay lines custom magnetics outside north america: hpc limited 26 wong chuk hang rd. 2nd fl. aberdeen, hong kong tel: 011 852 2580 1878 fax: 011 852 2870 2663 in north america: pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 tel: (888) 892-0761 (818) 892-0761 fax: (818) 894-5791 web: www.pca.com providing magnetic solutions since 1950 electronics inc. |
Price & Availability of EPI3L0242F2222
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |